Page:
1
2
This 1959 MGA has arrived at Ragtops for body work and alignment, and the beginning stages of paint work.
Date: 10/16/2008
Views: 115
Every piece of metal has to be stripped, either chemically or by media blasting.
Date: 12/01/2008
Views: 88
Each bare metal piece needs to be primed to prevent flash rusting while being worked on.
Date: 12/02/2008
Views: 82
The disassembled body in primer, ready for metal work.
Date: 12/05/2008
Views: 97
After stripping, this fender has shown signs of rust damage and needs repair.
Date: 11/21/2008
Views: 100
The driver door and rear fender are being test fit to the car.
Date: 11/23/2009
Views: 103
The bonnet being first fit to the car, the gaps around the bonnet need to be adjusted.
Date: 10/15/2009
Views: 87
The car body has been seam sealed prior to priming.
Date: 12/16/2009
Views: 103
The car body on the rotisserie ready for priming.
Date: 12/16/2009
Views: 102
Page:
1
2